Structural damage from corrosive elements is one of the most common reasons why facilities accrue costs for repair and maintenance. Corrosive elements are everywhere in the planet and corrosion comes from the constant reaction of certain types of chemicals with the elements in steel or metal surfaces. When corrosion is unchecked, metal and steel surfaces fall to corrosion and weaken, affecting operational efficiency. Ugly stains, as well as visible surface discolorations and irregularities, are signs that corrosion is in progress.
Corrosion protection coatings are needed to protect surfaces from corrosion. The importance of properly-applied high-performing corrosion protection coatings cannot be undermined, in terms of providing an insulating barrier against the potential harmful effects of corrosion. Not only are corrosion protection coatings useful as barrier coatings, some products are sacrificial in nature, receiving the brunt of any corrosive attack to spare the actual metal surface from being corroded.
When corrosion becomes so prevalent that it threatens surface integrity and lessens the useful life of the entire structure, corrosion protection coatings system need to be repaired to remove corrosion. This comes at a significant cost, which is why it is often advised to choose the most effective corrosion protection coatings at the very beginning of any coating system installation project.
Monday, November 30, 2009
Thursday, November 26, 2009
Overlays and Radiant Heat Concrete Finishes
With practicality and good aesthetics finally coming together in the form of innovative concrete finishes, what other concrete solutions are out there that add variety of choice in concrete flooring systems?
Durability and decorative appeal are the primary purpose of concrete overlays. Also known as resurfacing, concrete overlays offer a cheaper alternative to entire-system replacement. Polymer resins provide good flooring system performance in coating overlay applications, although the polymer mixture can vary from product to product. Concrete overlays need for the foundation to be stable, that is, no damage in the underlying base has yet occurred. If any sign of instability is evident, concrete finishes through overlaying or resurfacing should not be implemented until the base foundation has been repaired.
Concrete finishes that pipe up ground heat through a network of tubings embedded in the concrete surface is also one of the most innovative concrete finishes today. These flooring systems save energy by circulating heat in the facility and maintaining temperature. Even existing flooring systems can be equipped with radiant heat. The process for existing concrete finishes is to embed tiny electric mats in the concrete surface, before overlaying the surface with thin cement to seal the mats in.
Durability and decorative appeal are the primary purpose of concrete overlays. Also known as resurfacing, concrete overlays offer a cheaper alternative to entire-system replacement. Polymer resins provide good flooring system performance in coating overlay applications, although the polymer mixture can vary from product to product. Concrete overlays need for the foundation to be stable, that is, no damage in the underlying base has yet occurred. If any sign of instability is evident, concrete finishes through overlaying or resurfacing should not be implemented until the base foundation has been repaired.
Concrete finishes that pipe up ground heat through a network of tubings embedded in the concrete surface is also one of the most innovative concrete finishes today. These flooring systems save energy by circulating heat in the facility and maintaining temperature. Even existing flooring systems can be equipped with radiant heat. The process for existing concrete finishes is to embed tiny electric mats in the concrete surface, before overlaying the surface with thin cement to seal the mats in.
Wednesday, November 25, 2009
Beautiful Concrete Finishes – It’s in the Curing
Concrete finishes can be transformed into appealing works of art during the pre-curing and curing stages of application. When concrete is still wet and in the pre-curing stage, shades of colors can be added immediately after the concrete has been poured. This turns the concrete slab more colorful, resulting to some of the most beautiful solutions in concrete finishes. Since color is added while the concrete is still wet, the shades look as if they are natural parts of the concrete finish.
Pre-cured colored concrete finishes often come in soft earth tones or pastels, although more vivid colors can be achieved with the use of a dry-shake color hardener. Color materials are troweled across the wet concrete slab, producing streaks or patches of brighter colors in concrete finishes. Stamped stone, wood or tile patterns in wet concrete finishes also add interesting variations.
Staining or acid-etching is done during post-curing of concrete finishes, allowing colored chemical stains to react with lime – present in concrete -- to form permanent surface colorings. To achieve intense colors, a higher cement composition is needed
Sawcutting deep grooves into cured concrete finishes is also another post-curing method. Half-inch grooves are cut into the dried surface, adding eye-catching texture to concrete finishes.
Pre-cured colored concrete finishes often come in soft earth tones or pastels, although more vivid colors can be achieved with the use of a dry-shake color hardener. Color materials are troweled across the wet concrete slab, producing streaks or patches of brighter colors in concrete finishes. Stamped stone, wood or tile patterns in wet concrete finishes also add interesting variations.
Staining or acid-etching is done during post-curing of concrete finishes, allowing colored chemical stains to react with lime – present in concrete -- to form permanent surface colorings. To achieve intense colors, a higher cement composition is needed
Sawcutting deep grooves into cured concrete finishes is also another post-curing method. Half-inch grooves are cut into the dried surface, adding eye-catching texture to concrete finishes.
Tuesday, November 24, 2009
Beautiful Floors with Polished Concrete Finishes
One of the most popular solutions to concrete finishes in commercial and industrial facilities is polished concrete. Even residential buildings favor this concrete flooring solution because it costs less to install and yet results to beautiful concrete finishes that lasts for long periods of time.
Polishing concrete finishes takes a high degree of skills in the part of painting contractors, because the process involves a steady hand and deep concentration to execute successfully. The right amount of polishing comes from using polishing disks that are encrusted at the edges with diamond powder. When the diamond-covered disks come in contact with the concrete substrate, it grounds any protrusions and uneven areas in the concrete, turning the surface into a smooth and shiny work of art.
The nice thing about polished concrete finishes is that they are durable and hardly need any re-finishing for long spans of time, incurring lesser maintenance costs. When combined with aggregate materials or added with a dash of color or stain, they are also an eye-catching alternative to costly tiles, carpets or vinyl coverings.
Polishing concrete finishes takes a high degree of skills in the part of painting contractors, because the process involves a steady hand and deep concentration to execute successfully. The right amount of polishing comes from using polishing disks that are encrusted at the edges with diamond powder. When the diamond-covered disks come in contact with the concrete substrate, it grounds any protrusions and uneven areas in the concrete, turning the surface into a smooth and shiny work of art.
The nice thing about polished concrete finishes is that they are durable and hardly need any re-finishing for long spans of time, incurring lesser maintenance costs. When combined with aggregate materials or added with a dash of color or stain, they are also an eye-catching alternative to costly tiles, carpets or vinyl coverings.
Monday, November 23, 2009
Great Solutions in Concrete Finishes
Concrete finishes are shedding their reputation for mere durability and practicality, although these virtues are good enough in themselves. These days, more and more industrial and commercial applications involve the innovative use of concrete finishes that enhance the decorative appeal of any parts of the facility. Creative new solutions have transformed the concrete from a grey slab meant to be covered with more eye-pleasing tiles or carpets, into increasingly popular concrete finishes that are a unique blend of the practical, functional and stunning beauty.
Some great solutions in concrete finishes include polishing concrete into a pleasing form, or pre-curing the concrete finishes and turn it into stunning works of art. Innovative post-curing techniques also produce concrete finishes that resemble an artist’s canvass, beautifying lobbies and hallways in any facility. Concrete overlays, and extremely functional radiant heat concrete finishes, are also some great solutions in concrete finishes that are becoming more popular.
These concrete finishes are not only very pleasing in appearance, they are also environment-friendly. Concrete adjusts to changing weather temperatures, hence it is very energy-efficient. And because concrete finishes do not rely on chemicals and toxic adhesives in their application, health risks are reduced for building tenants and clients.
Some great solutions in concrete finishes include polishing concrete into a pleasing form, or pre-curing the concrete finishes and turn it into stunning works of art. Innovative post-curing techniques also produce concrete finishes that resemble an artist’s canvass, beautifying lobbies and hallways in any facility. Concrete overlays, and extremely functional radiant heat concrete finishes, are also some great solutions in concrete finishes that are becoming more popular.
These concrete finishes are not only very pleasing in appearance, they are also environment-friendly. Concrete adjusts to changing weather temperatures, hence it is very energy-efficient. And because concrete finishes do not rely on chemicals and toxic adhesives in their application, health risks are reduced for building tenants and clients.
Thursday, November 19, 2009
Food Safe Floor Coatings and Finishes
Installing food safe floor coatings in the facility is one of the numerous items covered by FDA regulations. Both the food processing industry and the FDA are driven by a common goal: to deliver safe and hygienic food products to the consumers.
Food processors can only operate when working in an environment that is FDA-compliant in all aspects – right down to the materials and floor coatings used in the facility. A section of the FDA’s Food Establishment Plan Review Guide specifies the design, installation and construction guidelines for food facilities. A sub-section is devoted to the specific guidelines on food safe floor coatings.
For kitchens, food processing floors, wash areas, storage rooms and waste disposal areas, commercial grade vinyl tiles and seamlessly-poured and sealed concrete are FDA’s approved finishes. Additionally, stainless steel and poured synthetic materials can also be used. These finishes are smooth, non-absorbent, and easy to clean. Furthermore, food safe floor coatings of epoxy-, silicone- or polyurethane-based materials can be installed, coatings that also sustain good flooring performance and longevity.
Note that the FDA does not specify any particular formulation or product for food safe floor coatings. Rather, the material composition of the coatings is considered. Materials that are non-toxic and do not encourage the growth of harmful microorganisms or any food contaminants are even more preferred.
Food processors can only operate when working in an environment that is FDA-compliant in all aspects – right down to the materials and floor coatings used in the facility. A section of the FDA’s Food Establishment Plan Review Guide specifies the design, installation and construction guidelines for food facilities. A sub-section is devoted to the specific guidelines on food safe floor coatings.
For kitchens, food processing floors, wash areas, storage rooms and waste disposal areas, commercial grade vinyl tiles and seamlessly-poured and sealed concrete are FDA’s approved finishes. Additionally, stainless steel and poured synthetic materials can also be used. These finishes are smooth, non-absorbent, and easy to clean. Furthermore, food safe floor coatings of epoxy-, silicone- or polyurethane-based materials can be installed, coatings that also sustain good flooring performance and longevity.
Note that the FDA does not specify any particular formulation or product for food safe floor coatings. Rather, the material composition of the coatings is considered. Materials that are non-toxic and do not encourage the growth of harmful microorganisms or any food contaminants are even more preferred.
Wednesday, November 18, 2009
Food Safe Floor Coatings Systems
The Food and Drugs Administration or FDA has some stringent standards for safety and sanitation in food processing plants, and this includes the facility layout and flooring systems within the facility premises. The guidelines for compliance are strictly observed, from manufacturing floor layouts, right down to the food safe floor coatings systems installed.
This is because the FDA is mandated to protect consumers against any health-threatening agents that may be released from food processing plants, and consequently ingested by humans. Many pathogens such as the as e. coli bacteria, listeria and salmonella are very harmful to the human population. There have been many cases of pathogen outbreaks in the past that had negatively affected the general public.
The FDA knows that these pathogens thrive in improperly-processed food products, which is due to unsanitary environments in food processing plants. Floors are one of the perfect breeding ground for these pathogens, and failure to install food safe floor coatings system can result to pathogen-infested floors. In the course of daily operations, accidental spillage or leaks in floors may transmit these pathogens directly to the food or ingredients being processed.
Food safe floor coatings can help protect food processing plant floors from damage, deterioration, and pathogen infestation. Installing food safe floor coatings systems in the facility is one way to obtain FDA certification, and avoids costly product recalls, fines, and forced closures resulting from compliance violations.
This is because the FDA is mandated to protect consumers against any health-threatening agents that may be released from food processing plants, and consequently ingested by humans. Many pathogens such as the as e. coli bacteria, listeria and salmonella are very harmful to the human population. There have been many cases of pathogen outbreaks in the past that had negatively affected the general public.
The FDA knows that these pathogens thrive in improperly-processed food products, which is due to unsanitary environments in food processing plants. Floors are one of the perfect breeding ground for these pathogens, and failure to install food safe floor coatings system can result to pathogen-infested floors. In the course of daily operations, accidental spillage or leaks in floors may transmit these pathogens directly to the food or ingredients being processed.
Food safe floor coatings can help protect food processing plant floors from damage, deterioration, and pathogen infestation. Installing food safe floor coatings systems in the facility is one way to obtain FDA certification, and avoids costly product recalls, fines, and forced closures resulting from compliance violations.
Tuesday, November 17, 2009
FDA Standards for Food Safe Floor Coatings
Grave risks to human safety and health are some of the main reasons why food processing facilities must adhere to strict environmental compliance standards. Unlike ordinary production plants, food processing facilities must be clean and free from dangerous contaminants that can end up being ingested by humans.
Food processing plants fall under the responsibility of the Food and Drug Administration (FDA), which evaluates the environmental and sanitation standards of the facility. Food manufacturers and processors must comply with safety and health regulations set by the FDA. Violating these regulations result to fines, product recalls, or even closure.
One of the common sources of sanitary concerns is the food safe floor coatings application installed in food processing floors. FDA regulations mandate food facilities to comply with flooring systems guidelines and maintain food safe floor coatings for their flooring systems at all times.
For flooring systems, FDA has hygiene in mind when certifying food processing facility floors. For floor coatings, FDA does not certify actual food safe floor coatings products, rather the ingredients that are in these products. The ingredients are evaluated mainly on their effect when ingested or inhaled by humans, and how they contribute to or threaten the health and well-being of the food-consuming populace.
Food processing plants fall under the responsibility of the Food and Drug Administration (FDA), which evaluates the environmental and sanitation standards of the facility. Food manufacturers and processors must comply with safety and health regulations set by the FDA. Violating these regulations result to fines, product recalls, or even closure.
One of the common sources of sanitary concerns is the food safe floor coatings application installed in food processing floors. FDA regulations mandate food facilities to comply with flooring systems guidelines and maintain food safe floor coatings for their flooring systems at all times.
For flooring systems, FDA has hygiene in mind when certifying food processing facility floors. For floor coatings, FDA does not certify actual food safe floor coatings products, rather the ingredients that are in these products. The ingredients are evaluated mainly on their effect when ingested or inhaled by humans, and how they contribute to or threaten the health and well-being of the food-consuming populace.
Monday, November 16, 2009
FDA-Approved Floors Coatings for Food Processing Plants
--
The food processing industry is undoubtedly one of the most critically-demanding industries in terms of requirements for food safe floor coatings applications. Food products of all kinds are, after all, highly-sensitive goods that need special care in processing and handling, to ensure that the target consumers – us, vulnerable humans – are not adversely ingesting any unsafe food materials or ingredients detrimental to our safety and welfare.
And whenever food safety is mentioned, food safe floor coatings in food processing facilities inevitably come to mind, as part of maintaining good environmental conditions.
Unlike ordinary manufacturing floors, food processing floors must comply with some stringent environmental requirements and the standards for compliance of regulating bodies like the Food and Drug Administration or FDA.
The FDA actually has specific guidelines for flooring systems for food processing plants, as well as food safe floor coatings and finishes. FDA-approved and food safe floor coatings must comply with strict safety and hygiene regulations aimed at preventing food-contamination and safety hazards during the many activities involved in food processing.
The food processing industry is undoubtedly one of the most critically-demanding industries in terms of requirements for food safe floor coatings applications. Food products of all kinds are, after all, highly-sensitive goods that need special care in processing and handling, to ensure that the target consumers – us, vulnerable humans – are not adversely ingesting any unsafe food materials or ingredients detrimental to our safety and welfare.
And whenever food safety is mentioned, food safe floor coatings in food processing facilities inevitably come to mind, as part of maintaining good environmental conditions.
Unlike ordinary manufacturing floors, food processing floors must comply with some stringent environmental requirements and the standards for compliance of regulating bodies like the Food and Drug Administration or FDA.
The FDA actually has specific guidelines for flooring systems for food processing plants, as well as food safe floor coatings and finishes. FDA-approved and food safe floor coatings must comply with strict safety and hygiene regulations aimed at preventing food-contamination and safety hazards during the many activities involved in food processing.
Thursday, November 12, 2009
Successful Deck Coatings Application
The planning and actual execution of the epoxy coatings application process are some of the most critical factors to achieving success in deck coatings projects. Facility managers should discuss the application process with the painting contractor, and make sure that the following project elements are in place:
1. Identification of the correct surface preparation procedures for the deck coating project. Surface preparation affects the quality and useful life of any installed epoxy coatings system, which is why extra care should be done even at this early stage of the application process. The important objective of surface preparation is to eliminate any dirt or contaminants, which are hindrances to good adhesion of the epoxy coatings system.
2. Determining the actual installation procedures, right down to the actual sequential tasks to be performed. A skilled painting contractor should be able to outline the steps to be done during epoxy coatings application, and execute these steps flawlessly or with minimal mishaps.
3. Identification of the actual epoxy coatings system to install. This assumes that a careful selection process has been done previously, and that the epoxy coatings products of choice are selected based on sound criteria, taking into consideration performance, any product warranty or maintenance restrictions.
4. Ensuring the availability of the right materials, tools, equipments and manpower for the deck coatings application. These are the resources that support the application process, needed to execute all application activities from preparation, application, and post-application clean-up, among others.
1. Identification of the correct surface preparation procedures for the deck coating project. Surface preparation affects the quality and useful life of any installed epoxy coatings system, which is why extra care should be done even at this early stage of the application process. The important objective of surface preparation is to eliminate any dirt or contaminants, which are hindrances to good adhesion of the epoxy coatings system.
2. Determining the actual installation procedures, right down to the actual sequential tasks to be performed. A skilled painting contractor should be able to outline the steps to be done during epoxy coatings application, and execute these steps flawlessly or with minimal mishaps.
3. Identification of the actual epoxy coatings system to install. This assumes that a careful selection process has been done previously, and that the epoxy coatings products of choice are selected based on sound criteria, taking into consideration performance, any product warranty or maintenance restrictions.
4. Ensuring the availability of the right materials, tools, equipments and manpower for the deck coatings application. These are the resources that support the application process, needed to execute all application activities from preparation, application, and post-application clean-up, among others.
Wednesday, November 11, 2009
Epoxies for Deck Coatings Project
After the initial and general deck requirements have been identified, the next crucial factor in implementing a successful deck coatings project is addressing the technical project requirements, specifically, the epoxy coatings to use for the project. Below are some guidelines when planning for the installation of the epoxy coatings system for the facility decks:
1. Specify the actual condition of the deck to be worked on. Varying epoxy coatings products are suitable for varying deck conditions. If the deck is used as an outside landing -- exposed to moisture -- a waterproofing epoxy coatings system may be the necessary solution. If there are cracks along a concrete deck, on the other hand, then concrete epoxy coatings sealers should be specified before any installation is to take place.
2. Consider the function of the deck when choosing the epoxy coatings product to use. While most decks function as regular traffic-bearing areas, there maybe special conditions that surround certain deck structures. These unique conditions should be taken into consideration when choosing the epoxy coatings product. The simplest example is, if extremely heavy vehicular traffic assaults the deck daily, a tough and impact-resistant epoxy coatings system should be installed.
3. Conduct a verification of epoxy coatings product performance. This can be done through evaluation of manufacturer’s data sheets, and any results of product tests and actual performance. Product verification is an effective way to compare many epoxy coatings options, and single out the most appropriate epoxy coatings system for the deck project.
1. Specify the actual condition of the deck to be worked on. Varying epoxy coatings products are suitable for varying deck conditions. If the deck is used as an outside landing -- exposed to moisture -- a waterproofing epoxy coatings system may be the necessary solution. If there are cracks along a concrete deck, on the other hand, then concrete epoxy coatings sealers should be specified before any installation is to take place.
2. Consider the function of the deck when choosing the epoxy coatings product to use. While most decks function as regular traffic-bearing areas, there maybe special conditions that surround certain deck structures. These unique conditions should be taken into consideration when choosing the epoxy coatings product. The simplest example is, if extremely heavy vehicular traffic assaults the deck daily, a tough and impact-resistant epoxy coatings system should be installed.
3. Conduct a verification of epoxy coatings product performance. This can be done through evaluation of manufacturer’s data sheets, and any results of product tests and actual performance. Product verification is an effective way to compare many epoxy coatings options, and single out the most appropriate epoxy coatings system for the deck project.
Tuesday, November 10, 2009
Deck Coatings General Project Requirements
When it’s time for the repair and maintenance of deck epoxy coatings, facility managers must take into consideration the following general requirements. Without addressing these issues, the epoxy coatings project has a high chance of running into problems and, worse, may not be implemented successfully.
1. Make sure that the planned project is not in violation of any existing building codes in the location or area. Building codes are particularly concerned with areas of the facility that are exposed to the weather. Compliance to the building code entails the use of weather-protective deck components like epoxy coatings.
2. Determine the scope of the project, particularly the deck to be repaired, including the type or purpose of the deck structure. The occupancy level and the amount of daily traffic should also be taken into account. These factors help in estimating the effect of any epoxy coatings application to the building occupants, as well as the level of interruption to operations, if any.
3. Clarify key project data with the painting contractor, such as the condition of the building and its useful life. Together with the deck requirement, these data greatly help contractors during planning and actual project implementation.
4. Make sure that all aspects of the project fall within set budgetary constraints. It is important that there is availability of funds to support the epoxy coatings project and any future maintenance costs.
1. Make sure that the planned project is not in violation of any existing building codes in the location or area. Building codes are particularly concerned with areas of the facility that are exposed to the weather. Compliance to the building code entails the use of weather-protective deck components like epoxy coatings.
2. Determine the scope of the project, particularly the deck to be repaired, including the type or purpose of the deck structure. The occupancy level and the amount of daily traffic should also be taken into account. These factors help in estimating the effect of any epoxy coatings application to the building occupants, as well as the level of interruption to operations, if any.
3. Clarify key project data with the painting contractor, such as the condition of the building and its useful life. Together with the deck requirement, these data greatly help contractors during planning and actual project implementation.
4. Make sure that all aspects of the project fall within set budgetary constraints. It is important that there is availability of funds to support the epoxy coatings project and any future maintenance costs.
Monday, November 9, 2009
Successful Deck Coatings Projects
Knowing the vulnerabilities of decks is the first step in implementing a successful deck coatings project. What are these common deck problems? The first is exposure to the elements, considering that decks are commonly located outside the facility. Next is the danger of water damage due to the flat surface of decks that holds moisture and is often slow drying. The last is physical impact from mechanical and foot traffic, given that decks are meant to be trod on constantly.
The deck’s epoxy coatings are usually the first to take damage, and need to be repaired as soon as damage has occurred. Upon the onset of damage, the repair of deck epoxy coatings will restore the much-needed maximum protection needed by decks, and that lasts for long periods of time.
Launching a deck coatings project entails the identification of the major general and technical requirements for an epoxy coatings project. General issues such as compliance to building codes and funding project, among others need to be considered. Technical issues may involve identification of the most suitable epoxy coatings product to use, or the function of the deck, or even the deck condition. Application methodology is also an important factor to consider, such as the appropriate surface preparation, mixing, curing, application, and post-project activities that need to be carried out to completely attain success in the deck epoxy coatings project.
The deck’s epoxy coatings are usually the first to take damage, and need to be repaired as soon as damage has occurred. Upon the onset of damage, the repair of deck epoxy coatings will restore the much-needed maximum protection needed by decks, and that lasts for long periods of time.
Launching a deck coatings project entails the identification of the major general and technical requirements for an epoxy coatings project. General issues such as compliance to building codes and funding project, among others need to be considered. Technical issues may involve identification of the most suitable epoxy coatings product to use, or the function of the deck, or even the deck condition. Application methodology is also an important factor to consider, such as the appropriate surface preparation, mixing, curing, application, and post-project activities that need to be carried out to completely attain success in the deck epoxy coatings project.
Thursday, November 5, 2009
Decorative Floor Coating Products and Application
Decorative floor coatings are now formulated to deliver quality performance just like regular heavy-duty formulations. Paint manufacturers have imbued decorative floor coatings with toughness and endurance that opened the doors for their installation in more and more applications, commercial or industrial.
Below are decorative floor coatings products and their varied applications:
1. Non-fading aliphatic polyisocyanates products. These are decorative floor coatings that prove resistant against detergents and chemical abrasives commonly used to clean or sanitize floors.
2. Two-component polyurethane systems. These decorative floor coatings provide visual appeal as well as sound- and water-proofing performance. They are also slip- and static-resistant and can withstand extreme climate conditions.
3. 100% solid epoxy coatings. These decorative floor coatings come in many shades and hues, giving wider choices in making utilitarian floors look more appealing.
4. Mosaic tile decorative floor coatings. These are tiled presentations that come with paint chips for added depth and beauty, minus the cost of actual tiles. Polyurethane top coats are used to complete the beautiful floor system that delivers excellent performance at the same time.
5. Colored quartz coatings. Instead of paint chips, an artistic combination of quartz and mosaic tiles delivers toughness and endurance on top of attention-grabbing visual presentation.
Below are decorative floor coatings products and their varied applications:
1. Non-fading aliphatic polyisocyanates products. These are decorative floor coatings that prove resistant against detergents and chemical abrasives commonly used to clean or sanitize floors.
2. Two-component polyurethane systems. These decorative floor coatings provide visual appeal as well as sound- and water-proofing performance. They are also slip- and static-resistant and can withstand extreme climate conditions.
3. 100% solid epoxy coatings. These decorative floor coatings come in many shades and hues, giving wider choices in making utilitarian floors look more appealing.
4. Mosaic tile decorative floor coatings. These are tiled presentations that come with paint chips for added depth and beauty, minus the cost of actual tiles. Polyurethane top coats are used to complete the beautiful floor system that delivers excellent performance at the same time.
5. Colored quartz coatings. Instead of paint chips, an artistic combination of quartz and mosaic tiles delivers toughness and endurance on top of attention-grabbing visual presentation.
Wednesday, November 4, 2009
Technical Capabilities of Decorative Floor Coatings
Breaking free of the conception that decorative floor coatings are suitable only for lightly-trafficked areas such as show rooms, concert halls or art galleries, many decorative floor coatings are now designed not only to be beautiful, but also to be tough and long-lasting.
Many decorative floor coatings offer high-performance technical features such as the ones below:
1. Suitable for outdoor areas such as recreational parks, patios and walkways, decorative floor coatings are built to be strongly-resistant to all types of weather conditions – extreme cold, snow, hot temperatures, wind or rain. What’s more, they are slip-resistant, easy to apply and fast-curing in low temperatures.
2. Decorative floor coatings products provide good substrate adhesion and when applied, they act as protective coatings to coated floor surfaces. They provide high resistance against moisture seepage or any type of water intrusion, as well as endurance against abrasives and other kinds of damages. A unique sealing ability makes them suitable for concrete surfaces.
3. Good surface elasticity and anti-skid resistance make decorative floor coatings suitable for athletic floors, basketball courts or sport gymnasiums.
4. Showing heavy-duty performance ability when it comes to industrial stresses such as toxic spills and mechanical loads, decorative floor coatings are also finding their way into industrial floors.
Many decorative floor coatings offer high-performance technical features such as the ones below:
1. Suitable for outdoor areas such as recreational parks, patios and walkways, decorative floor coatings are built to be strongly-resistant to all types of weather conditions – extreme cold, snow, hot temperatures, wind or rain. What’s more, they are slip-resistant, easy to apply and fast-curing in low temperatures.
2. Decorative floor coatings products provide good substrate adhesion and when applied, they act as protective coatings to coated floor surfaces. They provide high resistance against moisture seepage or any type of water intrusion, as well as endurance against abrasives and other kinds of damages. A unique sealing ability makes them suitable for concrete surfaces.
3. Good surface elasticity and anti-skid resistance make decorative floor coatings suitable for athletic floors, basketball courts or sport gymnasiums.
4. Showing heavy-duty performance ability when it comes to industrial stresses such as toxic spills and mechanical loads, decorative floor coatings are also finding their way into industrial floors.
Tuesday, November 3, 2009
Multi-Purpose Decorative Floor Coatings
Decorative floor coatings are always installed in areas that need to project a pleasing or attractive look, such as commercial lobbies, corporate foyers and hallways, reception areas, boardrooms, and many other locations where visitors are expected and where businesses attempt to impress clients or customers with an appealing image.
But because decorative floor coatings are now tougher and designed with high-performance in mind, there is more to decorative floor coatings now than meets the eye. Their ability to withstand nearly all types of heavy loads and stresses have made decorative floor coatings a more attractive choice for industrial areas such as loading decks, warehouses, and even manufacturing floors.
In new epoxy-based formulations, what used to be drab-colored but reliable epoxy floor paints now comes in more color choices, making it easy for facility managers to combine aesthetics and function. These new decorative floor coatings products benefit service facilities such as hospitals, schools, airport lobbies and hangars, among others.
For outdoor pool decks, patios, garden walkways and the like, decorative floor coatings of elastomeric formulations are also used. With ingenious application methods such as layering, texturing, or mosaic applications, eye-catching decorative floor coatings decidedly enhance an otherwise ordinary-looking floor.
But because decorative floor coatings are now tougher and designed with high-performance in mind, there is more to decorative floor coatings now than meets the eye. Their ability to withstand nearly all types of heavy loads and stresses have made decorative floor coatings a more attractive choice for industrial areas such as loading decks, warehouses, and even manufacturing floors.
In new epoxy-based formulations, what used to be drab-colored but reliable epoxy floor paints now comes in more color choices, making it easy for facility managers to combine aesthetics and function. These new decorative floor coatings products benefit service facilities such as hospitals, schools, airport lobbies and hangars, among others.
For outdoor pool decks, patios, garden walkways and the like, decorative floor coatings of elastomeric formulations are also used. With ingenious application methods such as layering, texturing, or mosaic applications, eye-catching decorative floor coatings decidedly enhance an otherwise ordinary-looking floor.
Monday, November 2, 2009
Beautiful Steps with Decorative Floor Coatings
Everyday facility floors bear the brunt of far too many loads -- mechanical traffic, human activities, chemical spillages, weather exposure, and countless many others. It’s no wonder that floor coating systems, when subjected to such punishing stresses daily, gradually show the results of wear and tear and eventually lead to failure. When floor coatings fail, flooring performance will eventually hinder productivity and may even cause serious safety risks.
To avoid performance problems related to floor coatings failure, facility managers automatically turn to heavy-duty coating systems that guarantee performance. These coatings used to come in drab and utilitarian colors -- beige, gray, or white. Decorative floor coatings are not considered synonymous with enduring quality performance back then. Function, not form, is the primary consideration. Decorative floor coatings are conceived appropriate only for museums, galleries, and low-stress, lightly-trafficked locations.
But with more and more paint manufacturers creating decorative floor coatings that are also tough and long-lasting, function has finally reconciled with form. Facility managers these days have a wider choice when it comes to floor coating applications. Today, facilities find a multi-purpose and flexible use of decorative floor coatings that can deliver good performance and visually-attractive floors at the same time.
To avoid performance problems related to floor coatings failure, facility managers automatically turn to heavy-duty coating systems that guarantee performance. These coatings used to come in drab and utilitarian colors -- beige, gray, or white. Decorative floor coatings are not considered synonymous with enduring quality performance back then. Function, not form, is the primary consideration. Decorative floor coatings are conceived appropriate only for museums, galleries, and low-stress, lightly-trafficked locations.
But with more and more paint manufacturers creating decorative floor coatings that are also tough and long-lasting, function has finally reconciled with form. Facility managers these days have a wider choice when it comes to floor coating applications. Today, facilities find a multi-purpose and flexible use of decorative floor coatings that can deliver good performance and visually-attractive floors at the same time.
Subscribe to:
Posts (Atom)
